Hardware installation is usually done by drilling holes in the tile after the tile is pasted, then inserting wooden wedges into the holes and securing the hardware pendant with screws or expansion screws on the top. It is suggested that the master open the hole of the ceramic tile with a glass drill and then hit the cement with a hammer drill to avoid cracking the ceramic tile. Hardware Sanitary ware installation position:

1. Single cup holder, double cup holder: generally installed on the wall of both sides of the face wash tray, and make up a line with the makeup holder. Used for toothbrushes and toothpastes;

2. Bath towel holder: It is mainly installed outside the bathtub, about 1.8 meters above the ground. The upper layer is placed with bath towels, and the lower tube can be hung with towels;

3. Paper towel holder: Install on the side of the toilet where it is easy to reach and not obvious. Generally 60 cm above the ground is appropriate.

4. Double pole towel rack: It can be installed on the empty wall of the bathroom. Separately installed, about 1.5 meters from the ground;

5. Storage rack (makeup rack): It is installed above the face wash plate and below the makeup mirror. The height from the basin should be 30 cm;

6. Single pole towel rack: It can be installed on the empty wall of the bathroom. About 1.5 meters above the ground;

7. Soap ashtray: It is installed on both sides of the wall of the face wash tray and forms a line with the dressing table. Can be combined with single or double cup holders. Soap nets can also be mounted on the inside walls of the bathroom for easy bathing. Soap ashtray is installed on the side of the toilet, convenient dust;

8. Coat hook: It can be installed on the wall outside the bathroom, 1.7 meters above the ground. It can be used to hang clothes in the bath or combine multiple hooks together.